Samsung SR20K9000UB 사용자 설명서
ENGLISH-20
information codes
1
The information
codes below
appear on the
display panel
appear on the
display panel
2
If a code appears,
turn off the emergency
switch and check the
instructions below and
take appropriate action
switch and check the
instructions below and
take appropriate action
3
The information
code will disappear
when you turn on
the emergency
switch
when you turn on
the emergency
switch
Information codes
checklist
the poWerbot is caught, stuck, trapped or lifted while
moving around.
moving around.
f
Turn off the emergency switch and move the POWERbot to another
area.
area.
foreign matter caught in the power brush.
f
Turn off the emergency switch and remove the foreign matter from the
Power brush.
Power brush.
foreign matter caught in the left Driving wheel.
f
Turn off the emergency switch and remove the foreign matter from the
Driving wheel.
Driving wheel.
foreign matter caught in the right Driving wheel.
f
Turn off the emergency switch and remove the foreign matter from the
Driving wheel.
Driving wheel.
Bumper sensor needs to be checked.
f
Turn off the emergency switch and turn it back on.
f
Contact a service center if information code does not disappear.
foreign matter accumulated on the obstacle sensor.
f
Turn off the emergency switch and clean the front and rear sensor
with a soft cloth.
with a soft cloth.
foreign matter accumulated on the cliff sensor.
f
Turn off the emergency switch and clean the cliff sensor with a soft
cloth.
cloth.
01_SR20K9000U@_EN_00749B-00_GE.indd 20
2016-07-15 오후 5:40:56