Samsung SHR-5040P 사용자 설명서
6
1
4
3
2
5
appendix _
57
09
A
PP
EN
D
IX
4. After install is complete, the screen below will be
displayed. Insert ID and password to connect to
DVR, and then click [LOGIN] .
5. If the correct log-in is used the WebDVR program
will run and display live video signal.
We recommended to use ATI VGA card if
possible for operation with the WebDVR.
Regardless of good compatibility the WebDVR
cannot operate on a VGA card which does not
support DirectDraw or YUV 4:2:0 YV12 format.
The recommended size of memory on the VGA
card is 64MB or over If not, it can cause the
WebDVR not to work.
WebDVR Main Mode
1. [View panel]
This panel displays the live picture from the DVR. And
for each channel the screen can be moved to any
position by Drag and Drop.
2. [Screen division button]
Choose between 4/6/9/10/16 screen divisions.
3. [Circulation Butto
n]
Button to start and stop circulating the cameras.
4.
[Full Screen Button]
Click this button to make the View panel full screen.
5.
[Camera Button]
Select camera button to be displayed.
6.
[Close Button]
Click
to exit the WebDVR program.
SHR-5042_Eng.indb 57
2007-06-08 ｿﾀﾈﾄ 1:25:25