Samsung SCX-8240NA 네트워크 가이드

Wireless Network Install Guide_ 

Double click the file and Safari will automatically open, then select Trust. The 

browser will open the SetIPApplet.html page that shows the machine’s name and 

IP address information. 

Click on the 

 icon (third from left) in the SetIP window to open the TCP/IP 

configuration window.

Enter the machine’s new information into the configuration window as follows. In a 

corporate intranet, you may need to have this information assigned by a network 

manager before proceeding.

•

MAC Address : Find the machine’s MAC address from the Network 

Configuration Report and enter it without the colons. For example, 

00:15:99:29:51:A8 becomes 0015992951A8.

•

IP Address: Enter a new IP address for your machine.
For example, if your computer’s IP address is 192.168.1.150, enter 

192.168.1.X. (X is number between 1 and 254 other than the computer’s 

address.)

•

Subnet Mask: Enter a Subnet Mask.

•

Default Gateway: Enter a Default Gateway.

Select Apply, then OK, and OK again. The machine will automatically print the 

configuration report. Confirm that all the settings are correct. Quit Safari. You may 

close and eject the installation CD-ROM. If necessary, restart the computer’s 

firewall. You have successfully changed the IP address, subnet mask, and gateway.

Before starting you will need to know the network name(SSID) of your wireless network and 

the network key if it is encrypted. This information was set when the wireless router(access 

point) was installed. If you do not know about your wireless environment, please ask the 

person who has set up your network.
To configure wireless parameters, you can use SyncThru™ Web Service.

Internet Explorer 6.0 or higher is the minimum requirement for SyncThru™ Web 

Service.

Before starting wireless parameter configuration, make sure cable connection status. 
1.

Check whether the network cable is connected to the machine. If not, connect the 

manchine with a standard network cable.

Start a web browser such as Internet Explorer, Safari or Firefox and enter your 

machine’s new IP address in the browser window.
For example,

Click Login on the upper right of the SyncThru™ Web Service website.
A log-in page appears. 

Type in the ID and Password then click Login.
If it’s your first time logging into SyncThru™ Web Service, type in the below default 

ID

. Password, contact your administrator.

•

ID: admin 

•

When the SyncThru™ Web Service window opens, click Network Settings.

Click 

Interface > Wi-Fi > Wi-Fi.

Wizard will help you setup the wireless network configuration. However, if 

you want to set the wireless network directly, select Custom.

Wireless-UG.book  Page 17  Friday, August 13, 2010  10:32 AM