Samsung SRF800GDLS 사용자 설명서

English - 24

Connecting to the water supply line

1.  First, shut off the main water supply line.
2.  Locate the nearest cold, drinking water line.

3.  Follow the Water line Installation Instructions in 

the installation kit.

CAuTION

The water line must be connected to the
cold water pipe.
If it is connected to the hot water pipe, it
may cause the purifier to malfunction.

Close Main Water 

pipe

Close Main 

Water pipe

No gap

4.  After connecting the water supply to the water 

filter, turn your main water supply back on and 

dispense about 3 L to clear and prime the 

water filter.

Connecting the water line to the 

refrigerator

1.  Remove the cap from the water line on the unit

and insert the compression nut of the water line
into the water line on the unit.

2.  Connect the water line on the unit with the 

water line in the kit .

3.  Tighten the compression nut onto the 

compression fitting. There should be no gaps 

between (A, B & C)

4.  Turn water on and check for any leakage.

Only connect the water line to a drinkable 

water source. If you have to repair or 

disassemble the water line, cut off 6.5 mm 

of the plastic tubing to make sure you get a 

snug, leak-free connection.

No gap

Loosen a

Remove cap

Water Line from 

Kit

Water Line from 

unit

Before being used, the leakage in these 

places should be examined.

•  Samsung Warranty does not cover WATER

LINE INSTALLATION.

•  It will be done at customer’s charge unless the

retail price includes installation cost.

•  Please contact Plumber or Authorized Installer

for the installation if needed.

•  If Water leakage occurs due to improper

installation, Please contact installer.

DA68-02952F (EN)-01-���.indd   24

2016. 12. 5.   �� 11:27