Samsung GN642HFGD 사용자 설명서
16
■ Take off the pan supports.
■ Clean these and the control handles with a damp cloth, washing up liquid and warm
■ Clean these and the control handles with a damp cloth, washing up liquid and warm
water. Stubborn soiling is best soaked before.
■ Finally dry everything with a clean soft cloth.
Cleaning and Maintenance
■ Cleaning operations must only be carried out when the appliance is cool.
■ The appliance should be disconnected from your mains supply before
■ The appliance should be disconnected from your mains supply before
commencing any cleaning process.
■ Clean the appliance regularly, preferably after each use.
■ Abrasive cleaners or sharp objects will damage the appliance
■ Abrasive cleaners or sharp objects will damage the appliance
surface;you should clean it using water and a little washing up liquid.
Pan support, Control handles
■ The glass top plate should only be cleaned when it has cooled down. Use a liquid
detergent to wash the glass, or alternatively use soapy water. For more stubborn dirt,
use the scraper supplied with the cooker.
■ Dry the glass plate thoroughly after cleaning.
Glass top plate
Usable
Unusable
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Soft Clothing
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Nylon Brush
Metal Brush
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Sponge Brush
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Edible Oil
Acidic/Alkali
Detergent
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Neutral Detergent
Soft Clothing
Sponge Brush
neutral Detergent
Nylon Brush
Edible Oil
Abrasive
Metal Brush
Acidic/Alkali
Detergent
Thinner/Benzene
Abrasive
Thinner/Benzene
Nylon Brush
Thinner/Benzene
Metal Brush
Abrasive
Soft Clothing
Sponge Brush
Neutral Detergent
17
■ Re-assemble the Auxiliary, Semi-Rapid and Rapid burners
as follows :
1. Place the flame spreader (13) on to the burner cup (14) so that the ignition device and the flame
supervision device extend through their respective holes in the flame spreader. The flame spreader
must click into place correctly.
2. Replace the burner lid (12) ensuring that the locating tabs fit into the noches in the flame spreader
(13).
■ Remove the burner lids and Flame Spreaders by pulling them upwards and away
from the top plate.
■ Soak them in hot water and a little detergent.
■ After cleaning and washing them, wipe and dry them carefully. Make sure that the
flame holes are clean and completely dry.
■ Wipe the fixed parts of the burner cup with a damp cloth and dry afterwards.
■ Gently wipe the Ignition device and flame supervision device with a well wrung-out
cloth and wipe dry with a clean cloth.
■ Before placing the burners back on the top plate, make sure that the injector is not
blocked.
BURNERS
Replace parts in the correct order after cleaning.
- Do not mix up the top and bottom.
- The locating lugs must fit exactly into the notches.
- Do not mix up the top and bottom.
- The locating lugs must fit exactly into the notches.
Cleaning and Maintenance (Continued)
12-1
12-2
13
14
12