Samsung Mono Multifunction Printer 사용자 설명서
M
AINTENANCE
8.6
4
Wipe the roller surface with a soft cloth dampened with
water.
water.
5
Carefully wipe the scanning glass with a soft dry cloth.
If the glass is very dirty, first wipe it with a slightly
dampened cloth, and then with a dry cloth. Be very careful
not to scratch the glass surface.
6
Replace the roller by inserting the left end first followed by
the right end, then rotating the bushing until it locks into
the right end, then rotating the bushing until it locks into
place.
7
Reconnect the support and the control panel and then close
the control panel firmly until it clicks into place.
the control panel firmly until it clicks into place.