Samsung Handheld Tablet PC 사용자 설명서
19
Q
I cannot find an AP.
Check the Wireless LAN LED.
A Check if the Wireless LAN LED is on.
If it is turned off, press the
Wheel
button to run the MENU program
and set
Wireless LAN to On. The
wireless LAN is turned on.
Q
The Wireless LAN device is
operating properly, but I cannot
connect to the Internet or to
another computer.
This is due to an incorrect
configuration, or a configuration
error. Check the following:
A1 When connecting to a wireless Ad-
Hoc network, check if the network
name (SSID) is the same.
A2 If you are using a network key
(encryption key), you have to use the
same network key for an AP (Access
Point) or a computer-to-computer
network (Ad Hoc).
The AP network key can be
configured using an AP management
program. For more detailed
information, ask your network
administrator or product provider.
A3 Check that the device driver is
installed properly. If the driver is
not properly installed, you will find
a yellow exclamation mark on the
network icon by clicking
Start >
Control Panel > System and
Maintenance > Device Manager >
Network Adapter.
Q
The signal strength is excellent,
but I cannot connect to the
network.
Even if the signal strength is
excellent, the network connection
may not operate properly if the
TCP/IP properties are not properly
configured, or the network key
(encryption key) is incorrect.
A Check that the TCP/IP properties
are configured properly. When
connecting to an AP, right-click the
Network Connections icon on
the taskbar and select
Network and
Sharing Center. If you click the View
Status next to a connected wireless
network device and then click the
Detail button, you can view the IP
information. If the IP is not allocated
properly, the IP address will be
displayed as follows (e.g. 169.254.
xxx.xxx).
Wireless Network (WLAN) Related