Samsung 320TSN-3 사용자 설명서

Mouse functions are emulated, including left-clicking, moving, unclicking, and dragging. This

function is recommended if writing, drawing or dragging map is required.

Enable (default) or disable the touchscreen.

The mouse cursor is not used in some applications; this function allows you to hide the cursor

without disabling the mouse function. This is recommended for big buttons used for playing

animation or children educational applications with "Click On Touch" mode.

Double clicking works the same on the touch screen as it does with a mouse. Tap a spot on

the screen twice in rapid succession. “Double Click Settings” can be adjusted for optimal

double-click performance. “Speed” is set in milliseconds. The higher the value, the longer the

effective time interval allowed for double clicks. “Area” (in pixels) is used to either increase

or reduce the allowed distance between double clicks. The higher the value (in pixels), the

more sensitive the touchscreen is to double clicks. Double-click is supported by the "Click on

touch,” “Click on Release,” and "Mouse Emulation" modes.

Enable the right-click function. Press and hold any part of the screen for two seconds. The

context menu will appear. The right-click function is available only in Mouse Emulation mode.

You may adjust the "Delay” in “Right Click Settings” if you find the context menu appears too

soon or late.

The higher the value, the later the context menu will appear. “Delay” is set in milliseconds.

The “area” determines the jitter-range of the touch surface within an error limit (in pixels). The

higher the value, the wider the jitter-range. The context menu will remain displayed as long

as your finger presses the screen within the range.

This function shows the time in milliseconds “Drag Delay” will take to be enabled after the

option is clicked. Drag Delay may be adjusted (in milliseconds) to the correct value if an object

cannot be precisely selected or if the cursor jitters when you touch the touchscreen.

After this function is enabled, the touchscreen will not respond to a quick touch or scratch on

the touchscreen. This mode is very useful when you need to press the screen for a while

within a specified area.

This function enables or disables the beep sound heard from the PC's built-in speaker, and

sets the cycle and frequency of the beeps. You can press the [Apply] button to enable the

beep feature after choosing [Enable touch] and vice versa. There are three Beep modes:

“Beep on touch,” “Beep on Release,” “Both.”

1. Beep on touch : A click is recognized when your finger contacts the touchscreen.

2. Beep on Release : A click is recognized when you lift your finger off the screen.

Using the Software