Samsung Color MultiXpress Printer X3280 사용자 설명서

다운로드
페이지 445
Loading originals
73
4. Media and tray
Close the RADF.
 
Leaving the 
RADF
 open while copying may affect copy quality and toner 
consumption.
Dust on the scanner glass may cause black spots on the printout. Always 
keep it clean.
If you are copying a page from a book or magazine, lift the 
RADF
 until its 
hinges are caught by the stopper and then close the lid. If the book or 
magazine is thicker than 30 mm (1 inch), start copying with the lid open.
 
 
Be careful not to break the scanner glass. You may get hurt.
Do not put hands on the scanner glass while closing the 
RADF
. The 
RADF
 
may fall on your hands and cause injury.
Do not look at the light inside of the scanner while copying or scanning. 
It is harmful to eyes.
 
In the reverse automatic document feeder (RADF)
Preparing originals
Do not load paper smaller than 140 x 140 mm (5.5 x 5.5 inches) or larger than 
297 x 432 mm (11.7 x 17 inches).
The RADF can automatically detect A5 LEF, Letters or A4 SEF, Legal SEF, A3 
SEF.
Do not attempt to load the following types of paper, in order to prevent 
paper jams, low print quality, and machine damage.
-
Carbon paper or carbon-backed paper
-
Coated paper
-
Onion skin or thin paper
-
Wrinkled or creased paper
-
Curled or rolled paper
-
Torn paper
Remove all staples and paper clips before loading.
Make sure any glue, ink, or correction fluid on the paper is completely dry 
before loading.
Do not load originals that include different sizes or weights of paper.
Do not load booklets, pamphlets, transparencies, or documents with other 
unusual characteristics.
Using the RADF, you can load up to 100 sheets of paper (80 g/m
2
, 20 lb bond) for 
one job.
1
Flex or fan the edge of the paper stack to separate the pages before 
loading originals.