Samsung RT2ASATS2 사용자 설명서

12_cleaning and care

door rEmoval

For normal use, the oven door must not be removed but if removal is necessary, for example, for 

cleaning purposes, follow these instructions.

CAUTION: The oven door is heavy.

1.  Open the door and flip open the clips 

at both hinges completely.

2.  Close the door by approximately 70 °. With both hands, 

grasp the sides of the oven door at its middle and pull-lift 

until the hinges can be taken out.

door glaSS rEmoval

The oven door is equipped with three sheets of glass placed against each other. These sheets can 

be removed for cleaning.

1  Press the both buttons on 

the left and right sides of the 

door.

2  Detach the covering and 

remove glass 1 from the 

door.

3  Lift glass 2 and Clean the 

sheets with warm water or 

washing-up liquid and polish 

dry them with a soft clean 

cloth.

The Door-Glass is different from 2 EA to 4 EA model by model. 

But, the method of the disassembly and assembly is same.

When assembly the inner glass 1, put printing to direction below.

BulB ExchangE

Danger of electric shock! 

Before replacing any of the oven bulbs, take the following steps:

•  Switch oven Off.

•  Disconnect the oven from the mains.

•  Protect the oven light bulb and the glass cap by laying a cloth on the bottom of the oven 

compartment.

•  Bulbs can be purchased from the SAMSUNG Service Centre.

rear oven lamp

1.  Remove cap by turning anticlockwise and remove the metal ring, 

the sheet ring and clean the glass cap. If necessary, replace the 

bulb with a 25 watt, 230 V, 300 °C heat-resistant oven light bulb.

2.  Clean the glass cap, the metal ring and the sheet ring if 

necessary.

3.  Fit the metal and the sheet ring to the glass cap.

4.  Place glass cap where you have removed it in step 1 and turn it 

clockwise to keep it in place.

➊

➋

BF1 Series_XEE-00352C_EN.indd   12

2011-06-27     8:22:25