Samsung AF55GC1MBEENMG 사용자 설명서

❋

❋

Items to prepare (compressor and insulation tape should be prepared by an installation technician.)

MH-14

20 x ø7.0(H x OD)

Width 18mm

50xØ8.0(LxOD)

1.   As shown in the figure, peel off the shields from the rubber/wire of the 

power cable.

 - Peel off 20 mm of the wire shields of the tube installed already.

After peeling off the tube wire, you must insert a contraction tube.

(Unit: mm)

120

60

20

20

20

180

Power cable (provided by us)

20

Wire tube power cable

2.  Insert both sides of core wire of the power cable into the connection 

sleeve.

Connection sleeve

3.  Using a compressor, compress the two points and flip it over and 

compress another two points in the same location.

 - The compression dimension should be 8.0.
 - After compressing it, pull both sides of the wire to make sure it is firmly 

pressed.

Comp. dim.

Compress it 4 times

5mm

4.   Wrap it with the insulation tape twice and position your contraction tube 

in the middle of the insulation tape.

5.  Apply heat to the contraction tube to contract it.

40mm

Insulation tape

Contraction tube

6.  After tube contraction work is completed, wrap it with the insulation tape 

to finish.

Insulation tape

In case of extending the electric wire, please DO NOT use a round-shaped pressing socket.
- Incomplete wire connections can cause electric shock or a fire.

PAC MIRAGE HPCO-AR-PH_IBIM_05321A-01_EN.indd   52

2015-03-03   오후 4:39:51