Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. Samsung
  4. DM82E-BR
  5. 빠른 설정 가이드

Samsung DM82E-BR 빠른 설정 가이드

다운로드
페이지 중 2
Quick Setup Guide
 -  The colour and the appearance may differ depending on the product, and the specifications 
are subject to change without prior notice to improve the performance.
 -  Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
DM82E-BR
BN68-07270J-00
The terms HDMI and HDMI High-Definition Multimedia Interface, and the 
HDMI Logo are trademarks or registered trademarks of HDMI Licensing 
LLC in the United States and other countries.
Reverse Side
0
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
AUDIO
OUT
RS232C
OUT
RS232C IN
SD CARD
DVI /
MAGICINFO IN
HDMI IN 1 
HDMI IN 2 
DP IN
IR /
AMBIENT
SENSOR IN
TRAY IN
RJ45
RGB IN
COMPONENT IN
IR
OUT
TOUCH OUT
USB
(5V 1A)
(5V 1A) /
TOUCH IN
USB
1
2
3
4
5
6
8
7
9
!
@
#
$
% ^
1 
Connects to MDC using an RS232C adapter.
 -  For details on how to use the MDC programme, refer to Help after 
installing the programme.
The MDC programme is available on the website.
2  
Supplies power to the external sensor board or receives the light 
sensor signal.
3 
Receives sound from a PC via an audio cable.
4 
Connects to the audio of a source device.
5 
Connect to an SD memory card.
6  
Connect to a USB memory device.
-  The USB ports on the product accept a maximum constant current
 of 1A. If the maximum value is exceeded, USB ports may not work.
7  
USB  (5V 1A): Connects to a USB device. Make sure the Touch is 
not in use.
TOUCH IN: This must be connected to the cable if the Touch is in use.
8 
DVI:  Connects to a source device using a DVI cable or HDMI-DVI cable.
 MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting 
a network box (sold separately).
9 
Connects to a PC using a DP cable.
0 
Connects to a source device using an HDMI cable.
!  
Connects to the Tray, found on the front of the product, using the 
OCM cable.
@ 
Connects to a source device using a D-SUB cable.
# 
Connects the Touch to a PC.
$ 
Connects to a source device using the AV/Component adapter.
%  
Receives the remote control signal via the external sensor board and 
outputs the signal via LOOP OUT.
^ 
Connects to MDC using a LAN cable.
External sensor KIT
1 
 
Light sensor
Automatically detects the intensity of ambient light around a selected 
display and adjusts the screen brightness.
2
  Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
-  Using other display devices in the same space as the remote control 
of this product can cause the other display devices to be inadvertently 
controlled.
3  
Power indicator
The power indicator will turn off when the product is turned on. It will 
blink in power-saving mode.
Checking the Components
Control Panel
1 
 
Power on the product.
If you press the   button when the product is turned on, the control 
menu will be displayed.
2 
 
Move to the upper or lower menu. You can also adjust the value of an option.
3 
Move to the left or right menu.
Contact the vendor where you purchased the product if any components are missing.
Speaker
IR / 
AMBIENT
SENSOR IN
Quick Setup Guide
Warranty card
(Not available in some locations)
Regulatory guide
Power cord
MagicInfo Software
DVD
+
+
-
-
Batteries
(Not available in some locations)
Remote Control
RS232C(IN) adapter
Tray
Screw  (M4L10, 11 EA)
OCM cable
External sensor KIT
USB cable
AV/Component adapter
AUDIO adapter
Cable grip
Wire holders
Touch Pen (1 EA)
Double-sided tape (6 EA)
Contact SAMSUNG WORLD WIDE
INDIA
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
Web site: http://www.samsung.com  
[DM82E-BR-QSG-INDIA]BN68-07270J-00.indd   1
2015-06-17   �� 1:02:22