Samsung 40" EBD Smart Series 빠른 설정 가이드
Model Name
EB40D
EB48D
Panel
Size (cm)
101.6
120.8
Display area (H x V) (cm)
88.6168 x 49.7664
105.3186 x 59.2128
Dimensions
(W x H x D) (cm)
/ Weight (kg)
(W x H x D) (cm)
/ Weight (kg)
Without Stand
91.42 x 54.79 x 9.09 / 7.0
108.32 x 63.78 x 9.09 / 9.1
With Stand
91.42 x 58.64 x 19.64 / 8.0
108.32 x 67.70 x 203.9 / 9.9
Synchronization
Horizontal Frequency (kHz)
30 ~ 61
Vertical Frequency (Hz)
60 ~ 75
Resolution
Optimum Resolution (Hz)
1366 x 768 @ 60
Maximum Resolution (Hz) 1366 x 768 @ 60
Power Supply
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental
considerations
considerations
Operating
Temperature: 0˚C ~ 40˚C (32˚F ~ 104˚F)
Humidity: 10 % ~ 80 %, non-condensing
Humidity: 10 % ~ 80 %, non-condensing
Storage
Temperature: -20˚C ~ 45˚C (-4˚F ~ 113˚F)
Humidity: 5 % ~ 95 %, non-condensing
Humidity: 5 % ~ 95 %, non-condensing
- Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
- Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect product performance.
- This device is a Class A digital apparatus.
- This device is a Class A digital apparatus.
(For India Only)
This product is RoHS compliant.
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers -
18002668282, 180030008282.
This product is RoHS compliant.
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers -
18002668282, 180030008282.
Normal Operation
Power off
Rating
Typical
Max
Power
Consumption
Consumption
EB40D
70 W
47.2 W
77 W
0.5 W
EB48D
84 W
56.3 W
93 W
- The displayed power consumption level can vary in different operating conditions or when settings are changed.
- SOG(Sync On Green) is not supported.
- To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord. Disconnect the power cable if you will not be using the product for an extended period of time
- SOG(Sync On Green) is not supported.
- To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord. Disconnect the power cable if you will not be using the product for an extended period of time
(during vacation, etc.).
INDIA
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
1800 266 8282 - Toll Free
Web site: www.samsung.com/displaysolutions
- Download the user manual from the website for further details.
RGB IN
RGB / DVI AUDIO IN
HDMI IN (DVI)
RGB / DVI AUDIO IN
HDMI IN (DVI)
AV IN / L-AUDIO-R
AV IN / VIDEO
HDMI IN (DVI)
RGB / DVI AUDIO IN
HDMI IN (DVI)
ANT IN
Connecting to a PC
Connecting the Antenna
Connecting to a Video Device
Specifications
Power Consumption
Contact SAMSUNG WORLD WIDE
Issues
Solutions
The screen keeps switching on and
off.
off.
Check the cable connection between the product
and PC, and ensure the connection is secure.
and PC, and ensure the connection is secure.
No Cable Connected is
displayed on the screen.
displayed on the screen.
Check that the product is connected correctly
with a cable.
with a cable.
Check that the device connected to the product
is powered on.
is powered on.
Not Optimum Mode is displayed. This message is displayed when a signal from the
graphics card exceeds the product’s maximum
resolution and frequency.
resolution and frequency.
Refer to the Standard Signal Mode Table and set the
maximum resolution and frequency according to the
product specifications.
maximum resolution and frequency according to the
product specifications.
The images on the screen look
distorted.
distorted.
Check the cable connection to the product.
The screen is not clear.
The screen is blurry.
The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc)
and try again.
and try again.
Set the resolution and frequency to the
recommended level.
recommended level.
The screen appears unstable and
shaky.
shaky.
Check that the resolution and frequency of the PC and
graphics card are set within a range compatible with the
product. Then, change the screen settings if required by
referring to the Additional Information on the product
menu and the Standard Signal Mode Table.
graphics card are set within a range compatible with the
product. Then, change the screen settings if required by
referring to the Additional Information on the product
menu and the Standard Signal Mode Table.
There are shadows or ghost images
left on the screen.
left on the screen.
The screen is too bright.
The screen is too dark.
The screen is too dark.
Adjust Brightness and Contrast.
Screen colour is inconsistent.
Go to Picture and adjust the Colour Space
settings.
settings.
Issues
Solutions
White does not really look white.
Go to Picture and adjust the White Balance
settings.
settings.
There is no image on the screen
and the power LED blinks
every 0.5 to 1 second.
and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the mouse to
return to the previous screen.
return to the previous screen.
The display looks unstable and
then freezes.
then freezes.
The screen may freeze when a resolution other than
the recommended resolution is used or if the
signal is not stable. To resolve the issue, change the
PC resolution to the recommended resolution.
the recommended resolution is used or if the
signal is not stable. To resolve the issue, change the
PC resolution to the recommended resolution.
There is no sound.
Check the connection of the audio cable or adjust
the volume.
the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC sound
card or software programme.
maximum level, adjust the volume on your PC sound
card or software programme.
The remote control does not work. Make sure that the batteries are correctly in place
(+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched
on in the vicinity.
on in the vicinity.
Troubleshooting Guide
[EBD-INDIA-QSG]BN68-06718K-00.indd 2
2014-09-23 4:52:03