Samsung 120 W 2.1Ch Soundbar F355 사용자 설명서

●

INSTALLING THE WALL MOUNT

You can use the wall mount bracket to mount this unit on a wall. 

 

Do not hang onto the installed unit and avoid any impact to the unit.

 

Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an 
injury or damage the product.

 

When the unit is installed on a wall, please make sure that children do not pull any of the 
connecting cables, as it may cause it to fall.

 

For the optimal performance of a wall mount installation, install the speaker system at least 2 
inches (5 cm) below the TV.

connections

•  Install on a vertical wall only.
•  For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the 

weight of the set.

•  Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or 

install the unit on different wall that can support the unit's weight. 

•  Purchase and use the fixing screws or mollys appropriate for the kind of wall you have (plaster board, iron 

board, wood, etc.). If possible, fix the support screws into wall studs. 

•  Connect cables from the unit to external devices before you install it on the wall.
•  Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.

1.  Place the wall mount bracket on a wall surface and then 

secure it with two screws (not supplied).
If you are hanging the unit below a TV, be sure to install the 
wall mount bracket so that the arrow ( ) is placed in the 
center of the TV.
Also make sure the unit is at least two inches (5 cm) 
below the TV.

2.  Align the screw holders (Holder-screw, AH61-03342A)  

with the screw holes on the back of the Main Unit. Insert 
the supplied screws through the screw holders, and then 
screw them into the Main Unit.

3.  Insert the USB cable into the back of the unit before 

installing it on the wall.

4.  Fit the unit into the corresponding slots of the wall mount 

bracket. For secure installation, make sure the mounting 
studs slide firmly down into the bottom of the slots.

The installation is complete.