Samsung AR24JCFSMWKNXL Powerful Cooling 24,000 Btu/hr 사용자 설명서

English-53

aLL

aTIO
n

how to connect your extended power cables

1. As shown in the figure, peel off the shields from the rubber/wire

of the power cable.

- Peel off 20 mm of the wire shields of the tube installed already.

2. Insert both sides of core wire of the power cable into the connection sleeve.

3. Using a compressor, compress the two points and flip it over

and compress another two points in the same location.

- The compression dimension should be 8.0.

- After compressing it, pull both sides of the wire to

make sure it is firmly pressed.

4. Wrap it with the insulation tape twice or more and position your contraction

tube in the middle of the insulation tape. A total of three or more layers of

insulation is required.

5. Apply heat to the contraction tube to contract it.

6. After tube contraction work is completed, wrap it with the

insulation tape to finish.

Tools

Crimping pliers Connection sleeve (mm)

Insulation tape

Contraction tube (mm)

Spec

MH-14

20xØ7.0(HxOD)

Width 18 mm

50xØ8.0(LxOD)

Shape

40 mm

Insulation tape

Contraction tube

(Unit: mm)

120

180

Power cable

Wire tube power cable

Connection sleeve

Comp. dim.

Compress it 4 times

5 mm

Insulation tape

• In case of extending the electric wire, please DO NOT use a round-shaped pressing socket.

- Incomplete wire connections can cause electric shock or a fire.

Items to prepare

(compressor and insulation tape should be prepared by an installation technician.)

• For information about the power cable specifications for indoor and

outdoor units, refer to the installation manual.

• After peeling off the tube wire, you must insert a contraction tube.

- Make sure that the connection parts are not exposed to outside.
- Be sure to use insulation tape and a contraction tube made of approved

reinforced insulating materials that have the same level of withstand

voltage with the power cable.(Comply with the local regulations on

extensions.)