Samsung QM85D-BR 빠른 설정 가이드
Quick Setup Guide
- Recommended hours of use per day of this product is under 16 hours. If the product is used for longer than 16 hours a day, the warranty may be void.
- The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the
- The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the
performance.
- The MagicIWB S user guide can be downloaded from http://www.samsung.com/displaysolutions.
- Download the user manual from the website for further details.
- Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
QM85D QM85D-BR
BN68-07440J-00
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Reverse Side
1
Supplies power to the external sensor board or receives the light
sensor signal.
sensor signal.
2
Connects to a source device using a HDMI cable or HDMI-DVI cable.
3
Connects to a PC using a DP cable.
- Obtain sharp picture quality when viewing UHD content at 30 Hz.
- The recommended resolution for the DP IN 3 (UHD 30Hz) port
- Obtain sharp picture quality when viewing UHD content at 30 Hz.
- The recommended resolution for the DP IN 3 (UHD 30Hz) port
is 1920 x 1080 @ 60 Hz. The resolution can be changed to the
optimal resolution of 3840 x 2160 @ 30 Hz, if required.
optimal resolution of 3840 x 2160 @ 30 Hz, if required.
4
Connects to a PC using a DP cable.
- Obtain sharp picture quality when viewing UHD content at 60 Hz.
- Obtain sharp picture quality when viewing UHD content at 60 Hz.
5
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
6
Connects to MDC using a LAN cable.
7
Receives the remote control signal via the external sensor board
and outputs the signal via LOOP OUT.
and outputs the signal via LOOP OUT.
8
Connects to MDC using an RS232C adapter.
- For details on how to use the MDC programme, refer to Help after
- For details on how to use the MDC programme, refer to Help after
installing the programme. The MDC programme is available on
the website.
the website.
9
Connects to a USB device when upgrading software.
0
Connects to a source device using a D-SUB cable.
!
Connects to the audio of a source device.
@
Receives sound from a PC via an audio cable.
Issues
Solutions
The screen keeps
switching on and off.
switching on and off.
Check the cable connection between the
product and PC, and ensure the connection is
secure.
product and PC, and ensure the connection is
secure.
No Signal
is displayed
on the screen.
Check that the product is connected correctly
with a cable.
Check that the device connected to the
product is powered on.
with a cable.
Check that the device connected to the
product is powered on.
Not Optimum Mode
is displayed.
This message is displayed when a signal
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
from the graphics card exceeds the product’s
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and
set the maximum resolution and frequency
according to the product specifications.
The images on the
screen look distorted.
screen look distorted.
Check the cable connection to the product.
The screen is not clear.
The screen is blurry.
The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
Remove any accessories (video extension
cable, etc) and try again.
Set the resolution and frequency to the
recommended level.
The screen appears
unstable and shaky.
unstable and shaky.
Check that the resolution and frequency of the
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
PC and graphics card are set within a range
compatible with the product. Then, change the
screen settings if required by referring to the
Additional Information on the product menu
and the Standard Signal Mode Table.
There are shadows or
ghost images left on the
screen.
ghost images left on the
screen.
Issues
Solutions
The screen is too bright.
The screen is too dark.
The screen is too dark.
Adjust Brightness and Contrast.
There is no image on
the screen and the
power LED blinks
every 0.5 to 1 second.
the screen and the
power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the
mouse to return to the previous screen.
mouse to return to the previous screen.
There is no sound.
Check the connection of the audio cable or
adjust the volume.
adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to
the maximum level, adjust the volume on
your PC sound card or software programme.
the maximum level, adjust the volume on
your PC sound card or software programme.
The remote control does
not work.
not work.
Make sure that the batteries are correctly in
place (+/-).
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs
switched on in the vicinity.
switched on in the vicinity.
Troubleshooting Guide
Checking the Components
Control Panel
Contact the vendor where you purchased the product if any
components are missing.
components are missing.
1
Power on the product.
If you press the button when the product is turned on, the control
menu will be displayed.
- To exit the OSD menu, press and hold the panel key for at least one
If you press the button when the product is turned on, the control
menu will be displayed.
- To exit the OSD menu, press and hold the panel key for at least one
second.
2
Move to the upper or lower menu. You can also adjust the value of an
option.
option.
3
Move to the left or right menu.
- You can adjust the volume by moving the panel key left or right
- You can adjust the volume by moving the panel key left or right
when the control menu is not displayed.
4
Speaker
5
Remote sensor
Press a button on the remote control pointing at the sensor on the
front of the product to perform the corresponding function.
- Using other display devices in the same space as the remote
Press a button on the remote control pointing at the sensor on the
front of the product to perform the corresponding function.
- Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
inadvertently controlled.
Quick Setup Guide
Warranty card
(Not available in some locations)
Regulatory guide
MagicInfo Software DVD
+
+
-
-
Power cord
Batteries
(Not available in some locations)
Remote Control
DP cable
Touch Pen (1EA)
(QM85D-BR Model Only)
QM85D-BR-QSG-India_BN68-07440J-00.indd 1
2015-09-02 3:52:49