Samsung RF26NBSH 사용자 설명서
01
SETTING UP
SETTING UP
5. With a Philips head screwdriver,
remove the 2 screws (
10
) attached to
the lower left and right door hinges.
With a Wrench(10mm), remove the
2 hex head bolts (
11
) attached to the
lower left and right door hinges.
Remove the lower left and right door
hinges(
12
).
3. Remove the 3 hex head
bolts(
7
) found attached to
the upper left and right door
hinges with a Wrench(10mm).
With a Philips head
screwdriver, remove the
ground screw(
8
) found
attached to the upper left and
right door hinges. Remove
the upper left and right door
hinges(
9
).
4. Lift the door straight up to remove.
Setting up your French
Door Refrigerator
3
4
5
6
2. Disconnect the electrical connector
(
3
) above the upper right
door hinge and the 3 electrical
connectors (
4
) above the upper left
door hinge.
Disconnect the water tube (
5
) by
pulling the tube fitting (
6
) apart as
shown in the picture.
7
8
9
10
11
12
• Be careful not to missplace the hinge cap because it can be easily taken
off.
Setting Up
_9
DA99-01623A-05.indd 9
2010.10.15 8:32:16 AM