Panasonic KX-MB2061 사용자 설명서
Display
Cause & Solution
“REMOVE PAPER IN INPUT
TRAY #2”
TRAY #2”
R The recording paper is installed in the manual input tray when trying to
receive faxes or print reports. Remove the recording paper from manual
input tray.
input tray.
“REPLACE DRUM CHANGE
SUPPLIES”
SUPPLIES”
R The drum cartridge’s service life is finished. Replace the drum cartridge and
the toner cartridge immediately.
“RX MEMORY FULL”
R The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Load paper (page 16) or remove the jammed
paper (page 126).
paper (page 126).
– check the connection between the computer and the unit.
– check that the computer is turned ON.
– check that the computer is turned ON.
– view, print or save the received fax documents using the web browser
on the computer connected via the LAN, and then erase the
unnecessary documents (page 66).
unnecessary documents (page 66).
– turn the setting to “OFF”. The fax documents stored in memory will be
printed automatically.
“SCANNER POSITION
ERROR”
ERROR”
R There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
personnel.
“SERIAL ERROR”
R There is something wrong with the unit. Contact our service personnel.
“SUBSCRIBE TO CALLER ID”
R You must subscribe to use Caller ID service. Contact your service provider/
telephone company for service availability. Once you receive caller
information, this message will not be displayed.
information, this message will not be displayed.
“TONER EMPTY”
“CHANGE SUPPLIES”
“CHANGE SUPPLIES”
R The toner is empty. Replace the toner cartridge immediately.
“TONER LOW”
“CHANGE SUPPLIES”
“CHANGE SUPPLIES”
R The toner is reaching the end of its life. You will need to replace the toner
cartridge soon.
“TOP COVER OPEN”
R The top cover is open. Close it.
“TRANSMIT ERROR”
R A transmission error occurred. Try again.
14.2.2 Cordless handset (KX-MB2060 optional)
Display
Cause & Solution
“Base no power”
or
“No link. Re-connect
base AC adaptor.”
base AC adaptor.”
R The cordless handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Turn the base unit’s power switch OFF to reset the unit. Turn the power
switch ON and try again.
R The cordless handset’s registration may have been canceled. Re-register
the cordless handset (feature #130 on page 104).
“Busy”
R The called unit is in use.
R Other units are in use and the system is busy. Try again later.
R The cordless handset you are using is too far from the base unit. Move closer
R Other units are in use and the system is busy. Try again later.
R The cordless handset you are using is too far from the base unit. Move closer
and try again.
“Call phone company for
your access #”
your access #”
R You have not stored the voice mail access number. Store the number
“Error!!”
R Recording was too short. Try again.
“Invalid”
R There is no cordless handset registered to the base unit matching the
cordless handset number you entered.
R The cordless handset is not registered to the base unit. Register the cordless
112
For assistance, please visit http://www.panasonic.com/help
14. Help