ZyXEL zte zxdsl-531b 사용자 설명서
ADSL Router User Manual
48
Dial On Demand:
If checked, under disconnected status, if any client PC sends out request for connection, the
ADSL Router will dial the ISP automatically. In this case, if the system administrator wants
to disconnect the PPP session, just click the Disconnect button at Quick Start page.
ADSL Router will dial the ISP automatically. In this case, if the system administrator wants
to disconnect the PPP session, just click the Disconnect button at Quick Start page.
Always On:
Enabling this feature will send echo request to ISP. This prevents the connection from being
hung up by ISP.
hung up by ISP.
The parameters for PPPoE configuration are generally the same as those of PPPoA. The additional parameters are:
Service Name:
Enter the name of your PPPoE service here.
Service Server:
Enter the name of your PPPoE service server here.
Note: When you initially add an PVC for the PPP connection and connect to ISP, a default
routing of 0.0.0.0 is added automatically to the IP Static Routing. If you set up more than
one PVC profiles and the first PVC is deleted, then you have to manually add the default
routing.
routing of 0.0.0.0 is added automatically to the IP Static Routing. If you set up more than
one PVC profiles and the first PVC is deleted, then you have to manually add the default
routing.
I
I
P
P
R
R
o
o
u
u
t
t
e
e
This web page allows you to set the route for data transmission.
Static Route
This page shows all static route status and allows you to add new static IP route or delete IP route. A Static IP Routing
is a manually defined path, which determines the data transmitting route. If your local network is composed of
multiple subnets, you may want to specify a routing path to the routing table.
This page shows all static route status and allows you to add new static IP route or delete IP route. A Static IP Routing
is a manually defined path, which determines the data transmitting route. If your local network is composed of
multiple subnets, you may want to specify a routing path to the routing table.
You can click Create a new route to add new route.
Destination Address: The destination IP address of the network where data packets are to be sent.
Netmask:
The subnet mask of the destination IP address.
Forward packets to: If you want add a rout on LAN side, you should choose the Gateway Address. Enter the
router address and then click Apply. If you want add a rout on WAN side, you should choose
the Interface. Select ATM PVC interface and then click Apply.
the Interface. Select ATM PVC interface and then click Apply.