eutech-instruments cyberscan ph 110 phmvrs232 meter 사용자 설명서

Instruction Manual   

 

CyberScan pH 11 / 110  

 

8

1.  Align the flange of the second electrode holder with the slot of the first holder 

(Figure 8). 

2.  Slide the flange of the second holder into the slot of the first holder until the 

tops of the holders are aligned and secure. 

 

1.  Do not use excessive force 

when inserting electrodes into 
the holders.  

2.   Insert the pH electrode into the 

opening of the first holder until 
the top housing of the electrode 
touches the top of the holder. 

3.  If you are using a separate 

temperature probe, insert the 
probe into the opening of the 
second holder until the ridge on 
the housing touches the top of 
the holder. 

 

NOTE:  The holder is designed for 
probes 12 mm in diameter.  Electrodes larger than 12 mm may not fit in the holder. 
Forcing the electrode into the opening may damage the holder or your electrode.  

The electrode holders can be attached in different positions for greater flexibility in 
measurement and storage purposes. Simply slide out the electrode holders and 
reorient into appropriate orientation before putting into position.