eutech-instruments cyberscan ph 110 phmvrs232 meter 사용자 설명서
Instruction Manual
CyberScan pH 11 / 110
27
4. Press HOLD/ENTER key. The “Prn” primary display will flash until all data is
printed.
5. To stop printing, press PRINT key and exit to measurement mode. See
Figure 26.
NOTE: All stored memory will remain in the meter after printing.
pH
MEAS
READY
0
10
21.0
sec
sec
4.75
ENTER
HOLD
ENTER
HOLD
MI
MR
Flash until all stored
data are downloaded.
data are downloaded.
Set timed interval to
download stored data
to printer or computer
download stored data
to printer or computer
ATC
°C
"Prn" display will keep flashing
until all stored data are printed. .
To stop, press PRINT key
Figure 26: Print all stored data
To Print Selected Stored Data:
1. From
measurement mode, press MR/▼ key.
2. “MEM” indicator appears and the last memory input location is displayed.
3. Press
MI/▲ or MR/▼ key to select a specific memory location, and press
HOLD/ENTER key.
4. When ready, press PRINT key.
5. The screen flashes “Prn/CUr” for about 0.5 seconds and switches back to the
stored data of the specific memory location.
6. Press HOLD/ENTER key. The meter is now ready to recall the next stored
data in the following memory location. See Figure 27.