Carvin tcs 사용자 설명서

The TCS115 & TCS215 use Carvin’s TCS3000 high frequency driver. This driver features

a 100 oz. magnet, 4” precision wound ferrofluid cooled voice coil,  titanium diaphram and
surround and a 2” throat exit.  This massive driver delivers smooth mids and pristine highs
at an incredible 350 W power rating.

The TCS115M & TCS210 use Carvin’s HF1100 high frequency driver.  This driver features

an 88 oz. motor structure, 2” precision wound voice coil, titanium diaphram and a 1” throat
exit.  This driver delivers crystal clear vocals and sweet highs at a 100 W power rating.

The TCS115, TCS215, TCS215W and the TCS218 all use a special type of heatsinked driver.

These drivers incorporate the latest in speaker technology using a 4” precision wound voice
coil cooled by a uniquely designed heatsink structure which allows these drivers to handle
up to 1500 W each. The massive motor structure drives a very rigid kevlar impregnated
paper cone to deliver thunderous lows.  

The TCS115M & TCS210 use Carvin’s PS15C and PS10 drivers.  Both  drivers feature kapton

voice coil formers, firm surrounds, and impregnated paper cones.  

Every one of the TCS series loudspeakers are tested to maximum power capacity before

shipping to ensure they are free of defects and to guarantee 100% satisfaction.

Freq. Resp.

58 - 19k Hz

65 - 15k Hz

70 0 - 15k Hz

48 - 19k Hz

40 - 1k Hz

30 - 800 Hz

Sensitivity 1W/1M

100 dB

101.7 dB

102 dB

101.5 dB

99.7 dB

101 dB

Power (EIA)

1500 Watts

600 Watts

600 Watts

3000 Watts

3000 Watts

3000 Watts

Nominal Impedance

8 

Ω

8

Ω

4

Ω

4

Ω

4

Ω

4

Ω

Crossover Biamp switch

Yes

Yes

Yes

Yes

No

No

Nominal Dispersion

90° x 40°

60° x 40°

60° x 40°

90° x 40°

N/A

N/A

Crossover Frequency

850 Hz

1k Hz

1k Hz

850 Hz

700 Hz

500 Hz

Mounting / Fly points

16

8

12

12

12

N/A

Dimensions
Height

32”

17”

31.25”

48”

48”

30”

Width (front)

20.5”

29.25”

13.25”

20.5”

20.5”

45”

Width (back)

7.25”

29.25”

7.50”

10”

10”

45”

Depth

18.75”

17”

14”

25”

25”

29.75”

Trap. Angle

12.5°

N/A

12.5°

12.5°

12.5°

N/A

Grille Material

14 Ga. 

14 Ga. 

14 Ga.

14 Ga.

14 Ga.

14 Ga.

Perf. Steel

Perf. Steel

Perf. Steel

Perf. Steel

Perf. Steel

Perf. Steel

Net Weight

119 lbs.

68 lbs.

57 lbs.

169 lbs.

138 lbs.

217 lbs.

CAUTION: It is important to select the proper wattage power amplifier.  For optimum per-
formance you need to have enough power  from your amplifier .  Great care should be
taken to not exceed the published power ratings of the loudspeakers.  Damage that occurs
from overpowering voids the manufacturers warranty.  External limiting can be used to
avoid this.  

The first thing to consider when selecting a power amplifier is how loud the system needs

to be.  This should be determined by the maximum output ratings of the loudspeaker or
number of loudspeakers, not by amplifier power.  A loudspeaker who’s capability exceeds
the needs of the system will always perform well, where as a loudspeaker who’s capa-
bility does not meet the needs of the system will likely be pushed beyond it’s capabilities
resulting in distortion which may cause failure.

Based on these considerations, the choice of power amplifier size should be based on

the power rating or just under the power rating of the loudspeaker.  CAUTION: If you
choose an amplifier under the power rating of the loudspeaker take care not to drive the
power amplifier into clipping for extended periods of time as this will permanently damage
the loudspeakers again voiding the manufacturers warranty.

SPEAKON