Acer g3620-044 사용자 설명서
3 Setting up your computer
14
English
Turning on your computer
After making sure that you have properly set up the system, applied power, and
connected all the necessary peripherals, you can now power on the system.
connected all the necessary peripherals, you can now power on the system.
Important: Make sure that the power cable is properly plugged into an
electrical outlet. If you are using a power strip or an AVR (Auto-Voltage
Regulator), make sure that it is plugged in and turned on.
electrical outlet. If you are using a power strip or an AVR (Auto-Voltage
Regulator), make sure that it is plugged in and turned on.
Turning off your computer
The software procedure below applies to system running a Windows OS. For other
OS shutdown procedures, refer to the related user documentation.
OS shutdown procedures, refer to the related user documentation.
1
On the Windows taskbar, click on the Start button, then click Shut Down.
2
Turn off all peripherals connected to your computer.
If you cannot shut down your computer normally, press and hold the power button
for at least four seconds. Quickly pressing the button may put the computer in
suspend mode only.
for at least four seconds. Quickly pressing the button may put the computer in
suspend mode only.