Acer veriton d630_36 사용자 설명서

다운로드
페이지 38
iii
Information for your safety and 
comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference. Follow 
all warnings and instructions marked on the product.
Turning the product off before cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners 
or aerosol cleaners. Use a damp cloth for cleaning.
Warnings
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product 
falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable operation of 
the product and to protect it from overheating. These openings must not be 
blocked or covered. The openings should never be blocked by placing the 
product on a bed, sofa, rug or other similar surface. This product should never 
be placed near or over a radiator or heat register, or in a built-in installation 
unless proper ventilation is provided.
Never push objects of any kind into this product through cabinet slots as they 
may touch dangerous voltage points or short-out parts that could result in a 
fire or electric shock. Never spill liquid of any kind onto or into the product.
To avoid damage of internal components and to prevent battery leakage, do 
not place the product on a vibrating surface.
Using electrical power
This product should be operated from the type of power indicated on the 
marking label. If you are not sure of the type of power available, consult your 
dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this product 
where people will walk on the cord.
If an extension cord is used with this product, make sure that the total ampere 
rating of the equipment plugged into the extension cord does not exceed the 
extension cord ampere rating. Also, make sure that the total rating of all 
products plugged into the wall outlet does not exceed the fuse rating.
Do not overload a power outlet, strip or receptacle by plugging in too many 
devices. The overall system load must not exceed 80% of the branch circuit 
rating. If power strips are used, the load should not exceed 80% of the power 
strip's input rating.