Apple emac ati usb2 2005 서비스 매뉴얼
eMac ATI Graphics/ USB 2.0/2005 Take Apart - 85
Antenna Board (eMac ATI Graphics)
Procedure
1.
Remove one screw on the antenna board.
Next, peel back the masking tape and pull the unused end of the antenna through the
hole in the digital/analog chassis.
2.
Carefully position the computer so that the CRT faces you.
Locate the metal antenna bracket at the top of the CRT. Remove the screw on the
bracket, then pry the antenna cable from the two clips on the side of the CRT.