Apple emac ati usb2 2005 서비스 매뉴얼

eMac ATI Graphics/USB 2.0/2005  Upgrades - 5

 Memory

Note: The RAM expansion modules used in the eMac (USB 2.0) computers are 184-pin 

SDRAM DIMMs (dual inline memory modules) that are 2.5 V, unbuffered, 8-byte, non-

parity, and PC2700 compliant. The speed of the SDRAM devices must be rated at 167 

MHz (7 ns) or faster. Refer to Kbase article 86718 for more information.

Important:  The memory expansion cards (DIMMs) must use SDRAM devices as 

specified above. DIMMs for previous models of eMac or DIMMs that use EDO or SGRAM 

devices will not work. If they are installed, the computer will beep, and the power light will 

flash several times when you turn on the computer. This indicates that the computer 

cannot find any useable RAM.

1.

Remove the replacement memory from its static-proof bag, taking care not to touch 

the connectors or chips.

2.

Push down the ejectors on the slot of the memory module you want to install or 

replace memory. (Figure 5)