Apple xserve intel 매뉴얼
Xserve (Late 2006) PCI Expansion Card Replacement Instructions
Loosen the thumbscrews at both ends of the front panel.
Grasp the thumbscrews and pull the Xserve forward until the safety latches engage (about
halfway out of the rack).
halfway out of the rack).
Latches
Thumbscrews
When the safety latches engage, grip the Xserve where it emerges from the rack, press down
on the latch tabs with your thumbs, and slide the Xserve the rest of the way out of the rack.
on the latch tabs with your thumbs, and slide the Xserve the rest of the way out of the rack.
Set the Xserve on a flat surface and unlock it.
Opening the Xserve
Loosen the thumbscrews at the back of the top cover and slide the cover back and up to remove
it. If you have difficulty removing the cover, check the enclosure lock on the front panel.
it. If you have difficulty removing the cover, check the enclosure lock on the front panel.
Warning: Even after you shut down the Xserve, its internal components can be very hot. Let
it cool before you open it.
it cool before you open it.
Important: To minimize the possibility of damage to Xserve components due to static discharge,
wear an antistatic wrist strap, if possible, while you work inside the Xserve.
wear an antistatic wrist strap, if possible, while you work inside the Xserve.
Unscrew the two
captive thumbscrews.
captive thumbscrews.
Slide the cover back and lift it off.
6.
7.
8.
9.