AASTRA 9112i sip ip phone 사용자 가이드

Advanced Network Settings

4-34

41-001129-00 Rev 09, Release 1.4.1  

IP Phone Administrator Guide

In addition to enabling/disabling the time server, you can also set the time and 
date, set the time and date format, set the time zone, and set daylight savings time 
on the IP phones. You configure these features using the configuration files, the IP 
Phone UI, or the Aastra Web UI. The following table identifies which method of 
configuration applies to each feature.

Use the following procedures to set a time and date, time and date format, time 
zone, and daylight savings time on the IP phones.

3

Enter an IP address or qualified domain name in the "Time Server 1", "Time Server 2", and/or 

"Time Server 3" field(s) to specify the location of the NTP time server.

Note: To enable/disable time serving, set the time/date format, and set the time zone, see 

 on 

page A-23. 

These parameters can be set using the configuration files only.

4

Click 

 to save your changes.

Set Time

IP Phone UI

Set Time Format

IP Phone UI
Configuration Files

Set Date

IP Phone UI

Set Date Format

IP Phone UI
Configuration Files

Set Time Zone

IP Phone UI
Configuration Files

Set Daylight Savings Time

IP Phone UI
Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, 

page A-25.