Access virus os4 사용자 설명서
182
CHAPTER
17
Global-, MIDI- and System Parameters
by rapidly flashing LEDs.
To achieve maximum sound qual-
ity for the system, you should set
the input signal to a level that is as
close as possible to the saturation
threshold. However you should
avoid setting the level beyond the
saturation threshold, otherwise
you will hear undesirable distor-
tion in the signal. You can also use
the level indicators to see if an
input signal is actually patched in.
To achieve maximum sound qual-
ity for the system, you should set
the input signal to a level that is as
close as possible to the saturation
threshold. However you should
avoid setting the level beyond the
saturation threshold, otherwise
you will hear undesirable distor-
tion in the signal. You can also use
the level indicators to see if an
input signal is actually patched in.
AUTO When you activate AUTO,
the LFO Rate LEDs will automati-
cally indicate the input level when
you switch to a SINGLE or PART
that accesses an external audio
outputs.
cally indicate the input level when
you switch to a SINGLE or PART
that accesses an external audio
outputs.
OUTPUT1
OUTPUT2
OUTPUT3
AUX1
AUX2 Much like when the set-
ting «ExtIn» is enabled, you can
have the two LFO Rate LED’s indi-
cate the signal levels of five further
signal buses. This lets you check
visually if a signal is being routed
via a given bus and spot over-
loaded circuits. When you activate
have the two LFO Rate LED’s indi-
cate the signal levels of five further
signal buses. This lets you check
visually if a signal is being routed
via a given bus and spot over-
loaded circuits. When you activate
this option, the LFO1 LED indicates
the left channel and the LFO2 LED
indicates the right channel of the
selected signal bus. The LEDs will
flash rapidly to indicated an over-
loaded bus.
the left channel and the LFO2 LED
indicates the right channel of the
selected signal bus. The LEDs will
flash rapidly to indicated an over-
loaded bus.
STEAL The ”Steal” setting indi-
cates if a voice is cut off in the
interest of providing the voices
required to render a new note
whenever the polyphony that
Virus has been exhausted. If the
device is forced to cut a note off, it
will select the voice whose signal
level has dropped furthest. Consid-
ering that a voice fades out over a
range of 0 to -144 decibels, but –
depending on the sonic context –
the signal fades into the back-
ground at -32 to -48 decibels, this
process of cutting off fading notes
is largely inaudible. The brightness
of the LFO Rate LED will fluctuate
to indicate the volume envelope’s
current level for the note that the
Virus is cutting off.
interest of providing the voices
required to render a new note
whenever the polyphony that
Virus has been exhausted. If the
device is forced to cut a note off, it
will select the voice whose signal
level has dropped furthest. Consid-
ering that a voice fades out over a
range of 0 to -144 decibels, but –
depending on the sonic context –
the signal fades into the back-
ground at -32 to -48 decibels, this
process of cutting off fading notes
is largely inaudible. The brightness
of the LFO Rate LED will fluctuate
to indicate the volume envelope’s
current level for the note that the
Virus is cutting off.
01111111111111111112
1 SYSTEM
LeadMode Auto≤
LeadMode Auto≤
61111111111111111154