Aeg Electrolux 1020f-w 사용자 설명서

다운로드
페이지 28
Problems and actions needed
24
Problems and actions needed
Never attempt any repairs or work on the cooker which could cause injury or damage the product. If you cannot 
solve the problem after checking the list below, contact a service company approved by the supplier.
At the end of the cooker’s life
1  
Disconnect the cooker from the electrical supply. 
2
  Cut off the electrical lead, as close as possible to 
    the rear of the cooker.
3
  Make sure that the oven door safety catch has been 
deactivated, to remove the risk of children locking 
themselves inside the oven.
Contact your local council to find out where you can 
dispose of your cooker.
Problem
Action needed
The cooker has no electrical supply
Check that: 
• 
THE
 
FUSE
(
S
) has not gone
• 
THE
 
PLUG
 is pushed in correctly
• 
THE
 
RCD
 (if fitted) has not tripped
Boiling/frying takes a long time.
Check you have a suitable pan that conducts heat properly (see 
“Choice of saucepan/frying pan” page 10)
The oven light is not working
Replace broken bulb (see “Changing oven light bulb” 
page 18)
The door safety catch isn’t working
Activate the door safety catch (see “The door safety catch” on 
page  6)