APart PA-CONFC 전단
APart PA-CONFC
CONFERENCE MICROPHONE TERMINAL
The APart PA-CONFC is a high quality chairman microphone terminal
that can be used in combination with the Apart PA-CONF microphone
system. The chairman unit has a solid, yet unobstructive design.
The microphone base is equipped with a “SPEECH” and “PRIORITY” button.
Pushing the “SPEECH” button activates the microphone and the red led on the
base and the red led ring on the microphone will lighten.
Pressing the “PRIORITY” button, will mute all delegate microphones that are
behind the PA-CONFC in the daisy chain. A few Seconds after the “PRIORITY”
button has been released, the delegate units (PA-CONFD) can be activated again
by pushing their “SPEECH” button. The build in limiter improves the intelligibility
and prevents big level differences between silent and “shouting” speeches.
that can be used in combination with the Apart PA-CONF microphone
system. The chairman unit has a solid, yet unobstructive design.
The microphone base is equipped with a “SPEECH” and “PRIORITY” button.
Pushing the “SPEECH” button activates the microphone and the red led on the
base and the red led ring on the microphone will lighten.
Pressing the “PRIORITY” button, will mute all delegate microphones that are
behind the PA-CONFC in the daisy chain. A few Seconds after the “PRIORITY”
button has been released, the delegate units (PA-CONFD) can be activated again
by pushing their “SPEECH” button. The build in limiter improves the intelligibility
and prevents big level differences between silent and “shouting” speeches.
The microphone base is equipped with a 3 pin XLR input in which the microphone
can be plugged in. Every microphone base has a stereo jack input and output.
The delegate units can be connected via daisy chaining. This way, linking the
cables to the delegate units is very easy (2 m cables included).
The microphone has a high quality Japanese uni-directional condensator
microphone capsule. Due to the quality of the microphone, feedback problems in
most cases won’t occur. It has a sturdy but very elegant and slim stem with a
flexible part at the top & bottom. A red LED ring on top of the microphones stem
indicates if the microphone is activated.
can be plugged in. Every microphone base has a stereo jack input and output.
The delegate units can be connected via daisy chaining. This way, linking the
cables to the delegate units is very easy (2 m cables included).
The microphone has a high quality Japanese uni-directional condensator
microphone capsule. Due to the quality of the microphone, feedback problems in
most cases won’t occur. It has a sturdy but very elegant and slim stem with a
flexible part at the top & bottom. A red LED ring on top of the microphones stem
indicates if the microphone is activated.
All these features, together with the unique PA-CONF microphone system, result in
a very competitive and versatile system that can be used for mobile use,
presentation purposes, debates, meeting rooms (replaces the standard 10 channel
microphone mixer) small conference systems and others. Installing this system
takes little time and is very easy, even for non-technical people.
a very competitive and versatile system that can be used for mobile use,
presentation purposes, debates, meeting rooms (replaces the standard 10 channel
microphone mixer) small conference systems and others. Installing this system
takes little time and is very easy, even for non-technical people.
WWW.APART-AUDIO.COM
INFO@APART-AUDIO.COM
TECHNICAL SPECIFICATIONS
Type
Polar pattern
Input
Polar pattern
Input
Base
Microphone
Microphone
Output
Frequency range
Sensitivity
Limiter
Light ring
Cable
Dimensions
Frequency range
Sensitivity
Limiter
Light ring
Cable
Dimensions
Base (H x W x D)
Microphone (L)
Microphone (L)
Weight (base + mic)
Table type Condensator microphone
Uni-directional cardioid
6.3 mm jack (1: Signal / 2: Conference power / 3: Ground)
XLR 3
6.3 mm jack (1: Signal / 2: Conference power / 3: Ground)
150 Hz - 16 kHz (-3dB)
-68 dB
Build in
Yes
6.3mm jack cable, 2 m
40 x 128 x 154 mm
470 mm
1.5 Kg
Uni-directional cardioid
6.3 mm jack (1: Signal / 2: Conference power / 3: Ground)
XLR 3
6.3 mm jack (1: Signal / 2: Conference power / 3: Ground)
150 Hz - 16 kHz (-3dB)
-68 dB
Build in
Yes
6.3mm jack cable, 2 m
40 x 128 x 154 mm
470 mm
1.5 Kg