Alcatel-Lucent speedtouch 500 사용자 설명서
249
Label Commands
RELATED COMMANDS:
precedence
A number between 0 and 7.
Represents the precedence in the IP packet (is part of tos)
Represents the precedence in the IP packet (is part of tos)
OPTIONAL
dscp
The DSCP in the IP packet (part of tos).
OPTIONAL
prot
The protocol (name or number) expected in the IP packet.
Select one of the supported protocol names (See
Select one of the supported protocol names (See
for a listing of
protocol names supported by the SpeedTouch™).
Alternatively, specify the protocol number.
Alternatively, specify the protocol number.
OPTIONAL
srcport
The TCP/UDP port (or beginning of range) the packet is coming
from.
Select one of the supported TCP/UDP port names (See
from.
Select one of the supported TCP/UDP port names (See
for a listing of
TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number.
Alternatively, specify the protocol number.
OPTIONAL
srcportend
The source TCP/UDP port range end (inclusive).
(Only applicable for ranges)
Select one of the supported TCP/UDP port names (See
(Only applicable for ranges)
Select one of the supported TCP/UDP port names (See
for a listing of
TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number.
Alternatively, specify the protocol number.
OPTIONAL
dstport
The TCP/UDP port (or beginning of range) the packet is going to.
Select one of the supported TCP/UDP port names (See
Select one of the supported TCP/UDP port names (See
for a listing of
TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number.
Alternatively, specify the protocol number.
OPTIONAL
dstportend
The destination TCP/UDP port range end (inclusive).
(Only applicable for ranges)
Select one of the supported TCP/UDP port names (See
(Only applicable for ranges)
Select one of the supported TCP/UDP port names (See
for a listing of
TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number.
Alternatively, specify the protocol number.
OPTIONAL
clink
The name of the chain to be parsed when this rule applies. (action is
ignored).
ignored).
OPTIONAL
log
Logging is done when this rule applies.
Choose between: no or yes
Choose between: no or yes
OPTIONAL
label
None, link (when clink is used) or label name.
REQUIRED
Clear statistics for a given rule.
Delete a specified rule in a chain.
Delete all rules in a chain.
Show a list of all (or a specified) chains' rules.
Show statistics for all (or a specified) chains' rules.