Alcatel-Lucent omniaccess 사용자 가이드
OmniAccess Wireless Quick Start Guide: Quick Start Guide
2
Part 031645-00
May 2005
Prerequisite Information
Before you start configuring the switch, collect the following network-related
information:
information:
T
ABLE
2 Required Information
Parameter
Description
Example Values
(see
(see
Figure 1
)
Switch /Loopback
IP address
IP address
This switch/loopback IP address is
a logical address that the Wireless
LAN Switch uses to communicate
with other Alcatel Wireless LAN
Switches and Alcatel Access
Points. This IP address is usually
on the same subnet as a layer-3 IP
interface on the switch.
a logical address that the Wireless
LAN Switch uses to communicate
with other Alcatel Wireless LAN
Switches and Alcatel Access
Points. This IP address is usually
on the same subnet as a layer-3 IP
interface on the switch.
10.200.14.14
Physical interface
for management
for management
This is the physical interface used
to manage the switch.
to manage the switch.
OmniAccess 4308 and 4324—this
is one of the in-band interfaces.
is one of the in-band interfaces.
OmniAccess 6000 —this is either
an in-band interface or the man-
agement port on the switch.
an in-band interface or the man-
agement port on the switch.
N
OTE
—The IP address of the physical
management port cannot be on the
same subnet as the Loopback IP
address.
same subnet as the Loopback IP
address.
Gigabit Ethernet
1/24 is used for
switch manage-
ment
1/24 is used for
switch manage-
ment
Switch Role
Master—if this is the only Alcatel
Wireless LAN Switch on the net-
work.
Wireless LAN Switch on the net-
work.
Local—if this switch is one of many
Wireless LAN Switches on the net-
work and will be managed by a
master Alcatel switch. (You also
have to provide the IP address of
the Master switch.)
Wireless LAN Switches on the net-
work and will be managed by a
master Alcatel switch. (You also
have to provide the IP address of
the Master switch.)
The switch role
selected as master
selected as master