Alcatel-Lucent omniaccess 사용자 설명서
The External Services Interface
61
Chapter 7
4
Click
Add
button in the
Server groups
section to configure a server group. If
a group exists and needs to be edited, click
Edit
for the group. Provide a
name to the group and map the required health check profile to this server
group.
group.
5
Click
Done
to accept this configuration.
6
Click
Add
in the
Security Servers
section to add a AntiVirusFirewall (AVF)
server device/server.
z
Provide a name to the device/server.
z
Assign this server to a group from the existing configured groups.
z
Choose the mode as bridge/route as the topology may require. Refer to
the description above to understand the differences between the two
modes.
the description above to understand the differences between the two
modes.
z
If the bridge mode is chosen, enter the trusted port and un-trusted port
as defined above in the description above.
as defined above in the description above.
z
If the route mode is chosen, enter the IP addresses of the trusted and
un-trusted interfaces on the AntiVirusFirewall (AVF) server device as
defined above.
un-trusted interfaces on the AntiVirusFirewall (AVF) server device as
defined above.
7
Click
Done
to accept this configuration.
8
Click
Apply
to apply the configuration (changes). Note that the configura-
tion will not take effect till this step is completed.