Alcatel-Lucent omniacces-voip gateway 사용자 설명서

Page 3-47

This dialing scheme illustrates how to connect a digital voice switching daughtercard (VSD) to 
an analog voice switching daughtercard (VSA) to send and receive calls. It also depicts a 
remote PSTN connection as part of a VoIP network in which a VSA providing analog connec-
tions using Plain Old Telephone Service (POTS) is connected to the PSTN via a remote VSD.

PBX #2 can send four simultaneous PSTN calls (on FXS LS lines) to the VoIP network; 
however, it can only receive two simultaneous calls (on FXO LS lines) from the VoIP 
network.

On Voice Daughtercard #2, the Foreign Exchange Station (FXS) Loop Start lines are used to 
send calls to the VoIP network from the PBX via analog trunks, whereas the Foreign 
Exchange Office (FXO) Loop Start lines are used to receive calls from the VoIP network and 
send them to the PBX.

 

— Expects to receive prefix digit 9 followed by at least 
one digit, and up to 22 digits or a “2” followed by any 
three digits on trunk (J).

— Expects to receive prefix digit 9 followed by at least 
one digit, and up to 22 digits or a “2” followed by any 
three digits on ports 1, 2, 3, or 4.

— Expects to receive a “1” or “2” followed by any 
three digits on trunk (R).

— Does not expect to receive any inseizes (outbound 
calls from PBX #2) on ports 1, 2, 3 or 4.