Alcatel-Lucent omniacces-voip gateway 사용자 설명서

Page 5-193

Set coding profile fax/modem switchover (enable/disable).

DSP tone detection on the voice channel must be ON in the specified coding profile if fax 
modem switchover is desired, as switchover relies on tone detection. Switchover can be either 
ON or OFF for a fax-only coding profile.

Definitions:
codingProfName

Identifies coding profile by name, (e.g., 

); maximum length of 40 characters. 

The following characters are permitted in the coding profile name: a-z, A-Z, 0-9, space and 
# * ~ ’ ‘ ; : , .@ $ % ^ _ & | / \ < > ( ) [ ] { }

Turns ON fax/modem switchover for specified coding profile.

Turns OFF fax/modem switchover for specified coding profile.

♦ Syntax Notes ♦

If the coding type is set to either PCM Mu-Law or PCM A-Law 
via the 

command, this parame-

ter can be ON or OFF.

If the coding type is set to fax T.38 this command should be set 
to OFF, because no switchover is required.

Default:
The default setting is 

.

Command Example: