Alpine cda-9830r 사용자 설명서

MP3 or WMA is not played back.
• Writing error occurred. The CD format is not compatible.

- Make sure the CD has been written in a supported format.

Refer to “About MP3/WMA” (page 14-15), then rewrite in
the format supported by this device.

The sound is not output from the speakers.
• Unit has no output signal of the internal amplifier.

- POWER-IC is switched to “ON” (page 25).

(CDA-9831R)

(CDA-9830R)

• Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature returns to

within operation range.

• No CD is inserted.

- Insert a CD.

• Although a disc is inserted, “NO DISC” is displayed and the

unit does not start to play or eject the disc.
- Remove the disc by following these steps:
 1) Press the c button.

The movable display will open.

 2) Press the c button again for at least 2 seconds while the

movable display is open.
If the disc still does not eject, consult your Alpine dealer.

• Mechanism error.

1) Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2) When the error indication remains after ejecting, press the

c button again.
If the error indication still does not turn off after pressing
the c button for a few times, consult your Alpine dealer.

If that the disc cannot be ejected by pressing c, press the RESET
switch (refer to page 6) and press c again.
If the disc still cannot be ejected, consult your Alpine dealer.

• A copy-protected WMA file was played back.

- You can only play back non-copy-protected files.

(CDA-9831R)

(CDA-9830R)

• The disc is not written in a MP3/WMA supported format.

- Use a disc written at the MP3/WMA supported format.

(CDA-9831R)

(CDA-9830R)

 • Protective circuit is activated due to high temperature.

- The indicator will disappear when the temperature returns to

within operation range.

• Malfunction in the CD Changer.

- Consult your Alpine dealer. Press the magazine eject

button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.

• Magazine ejection not possible.

- Press the magazine eject button. If the magazine does not

eject, consult your Alpine dealer.

• A disc is left inside the CD Changer.

- Press the eject button to activate the eject function. When the

CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.

(CDA-9831R)

(CDA-9830R)

• No magazine is loaded into the CD Changer.

- Insert a magazine.

• No indicated disc.

- Choose another disc.