Alpine cda-9847r 사용자 설명서
19
-EN
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, choose from Sound Customizing,
Visual Customizing, etc., to select your desired setting.
usage. From the SETUP menu, choose from Sound Customizing,
Visual Customizing, etc., to select your desired setting.
A typical SETUP procedure is shown in steps 1 to 4
as follows. See below for further information about
each SETUP menu.
as follows. See below for further information about
each SETUP menu.
1
Press and hold F/SETUP for at least 2 seconds.
SETUP mode is activated.
2
Press g or f to select the desired SETUP
menu.
menu.
(e.g. Select SUBW)
FM-LEVEL
↔ RDSREG*
1
↔ PI SEEK*
2
↔ ILLUMI ↔ DIMMER ↔
SUBW
↔ (SUBW SYS)*
3
↔ CDDA / CDDA / MP3 ↔ SCROLL
TYPE
↔ SCROLL ↔ MUTE ↔ AUX IN ↔ (AUX NAME)*
4
↔
D-AUX
↔ POWER IC ↔ OTHER/H510 ↔ DEMO ↔ FM-LEVEL
*
1
Refer to “Receiving RDS Regional (Local) Stations” (page 8)
*
2
Refer to “PI SEEK Setting” (page 9)
*
3
Displayed only when SUBW is ON.
*
4
Displayed only when AUX is ON.
3
Press BAND to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press F/SETUP again.
The display returns to normal mode.
Sound Customizing
Adjusting Source Signal Levels
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW
If the difference in volume level between the CD player and FM radio
is too great, adjust the FM signal level.
is too great, adjust the FM signal level.
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
subwoofer output level.
1 Press the Rotary encoder repeatedly to select the
SUBW mode.
BASS
→ TREBLE → SUBW → BALANCE → FADER →
DEFEAT
→ VOLUME → BASS
2 To adjust the level, turn the Rotary encoder.
Setting the Subwoofer System
SUBW SYS 1 (Initial setting) / SUBW SYS 2
Select either SYSTEM1 or SYSTEM2 for the desired subwoofer effect.
SYS 1 : Subwoofer effect is dependent on the main
volume setting.
SYS 2 : Subwoofer effect is independent of the main
volume setting. For example, even if the volume is
low, the subwoofer is still effective.
low, the subwoofer is still effective.
Visual Customizing
Changing Lighting Colour
ILLUMI BLUE (Initial setting) / GREEN / AMBER / RED
You can change the lighting colour of the following four buttons:
SOURCE/POWER, BAND, g and f.
SOURCE/POWER, BAND, g and f.
BLUE
→ GREEN → AMBER → RED → BLUE
• According to the lighting colour of the above four buttons, the
colour of the other buttons also changes.
When the colour of the four buttons is BLUE/AMBER/RED, the
colour of the others is RED. When the colour of the four buttons is
GREEN, the others are also GREEN.
When the colour of the four buttons is BLUE/AMBER/RED, the
colour of the others is RED. When the colour of the four buttons is
GREEN, the others are also GREEN.
Dimmer Control
DIMMER AUTO (Initial setting) / DIMMER MANU
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON.This
mode is useful if you feel the unit's button lighting is too bright at
night.
brightness of the unit with the head lights of the vehicle ON.This
mode is useful if you feel the unit's button lighting is too bright at
night.
• If your vehicle should have a dimmer control for the
dashboardlights, never connect the DIMMER cable (orange) of the
radio to this dimmer control.
radio to this dimmer control.
Scroll Type Setting
TYPE1 (Initial setting) / TYPE2
Choose from two scrolling methods.
Select the type you prefer.
Select the type you prefer.
TYPE1
: The characters scroll sequentially, appearing from
the right side of the display.
TYPE2
: The characters are displayed one by one, and
disappear one by one from the left side of the
display after the screen is filled up with the
characters.
display after the screen is filled up with the
characters.
Scroll Setting
SCROLL AUTO / SCROLL MANU (Initial setting)
This CD player can scroll the disc and track names recorded on CD-
TEXT discs, as well as the text information of MP3/WMA files,
folder names, and tags.
TEXT discs, as well as the text information of MP3/WMA files,
folder names, and tags.
SCROLL AUTO : The CD text information, the text information
of folder and file names, and the tags are
scrolled automatically. Scrolling only takes
place when the information cannot be
shown in the display in its entirety.
scrolled automatically. Scrolling only takes
place when the information cannot be
shown in the display in its entirety.
SCROLL MANU : The display is scrolled only when a disc is
loaded or when a track is changed, etc.
• The unit scrolls CD text names, folder names, file names or tag
display. The disc titles input manually (page 18) cannot be scrolled.
Demonstration
DEMO ON / DEMO OFF (Initial setting)
This unit has a demonstration feature for the display and sound.
• To quit Demo mode, set to DEMO OFF.
f
g
BAND
F/SETUP
Continued
Rotary encoder
SOURCE/
POWER
POWER