Aopen s661fxm7s 사용자 설명서
21
10/100Mbps LAN Supported
On the strength of SiS LAN controller on board, this motherboard provides
10/100Mbps Ethernet for office and home use. The Ethernet RJ45 connector is
located on the top of USB ports. The right hand side LED indicates link mode; it
lights in yellow when linking to network. The left hand side LED indicates the
transfer mode and will light in green when data is transferring at 100Mbps (never
lights while at 10Mbps). To enable or disable this function, you may simply adjust
it through BIOS. To enable LAN wakeup function, you have to set the “Wake on
PCI Card” enable in the BIOS “Power Management Setup” section.
10/100Mbps Ethernet for office and home use. The Ethernet RJ45 connector is
located on the top of USB ports. The right hand side LED indicates link mode; it
lights in yellow when linking to network. The left hand side LED indicates the
transfer mode and will light in green when data is transferring at 100Mbps (never
lights while at 10Mbps). To enable or disable this function, you may simply adjust
it through BIOS. To enable LAN wakeup function, you have to set the “Wake on
PCI Card” enable in the BIOS “Power Management Setup” section.
Speed LED (Left)
Green 100Mbps
ACT LED (Right)
Yellow