Aopen mx3l 사용자 설명서
Hardware Installation
2-4
2.2 Jumpers
With the help of VID signal and SMbus, this motherboard is jumper-less design.
2.2.1 Selecting the CPU Frequency
VID signal and SMbus clock generator provide CPU voltage auto-detection
and allow user to set CPU frequency through CMOS setup, no jumper or
switch is needed. The correct CPU information is saved into EEPROM, with
these technologies, the disadvantages of Pentium base jumper-less design
are eliminated. There will be no worry of wrong CPU voltage detection and no
need to re-open the housing if CMOS battery loss.
The CPU frequency selection is set by going into:
and allow user to set CPU frequency through CMOS setup, no jumper or
switch is needed. The correct CPU information is saved into EEPROM, with
these technologies, the disadvantages of Pentium base jumper-less design
are eliminated. There will be no worry of wrong CPU voltage detection and no
need to re-open the housing if CMOS battery loss.
The CPU frequency selection is set by going into:
BOIS Setup Æ Chipset Features Setup Æ CPU Clock Frequency
(The possible setting is 66.8, 68.5, 75, 83.3 MHz)
(The possible setting is 66.8, 68.5, 75, 83.3 MHz)
BOIS Setup Æ Chipset Features Setup Æ CPU Clock Ratio
(The possible setting is 1.5x, 2x, 2.5x, 3x, 3.5x, 4x, 4.5x, 5x, 5.5x, 6x, 6.5x, 7x,
7.5x, and 8x)
(The possible setting is 1.5x, 2x, 2.5x, 3x, 3.5x, 4x, 4.5x, 5x, 5.5x, 6x, 6.5x, 7x,
7.5x, and 8x)
Core frequency = Ratio * External bus clock
INTEL Celeron PPGA
CPU Core Frequency
Ratio
External Bus Clock
Celeron PPGA 366
366MHz=
5.5x
66MHz
Celeron PPGA 400
400MHz=
6x
66MHz
Celeron PPGA 433
433MHz=
6.5x
66MHz
Warning: INTEL 440LX chipset supports maximum 66MHz
external CPU bus clock, the higher clock settings are for internal
test only. These settings exceed the specification of LX
chipset, which may cause serious system damage.
external CPU bus clock, the higher clock settings are for internal
test only. These settings exceed the specification of LX
chipset, which may cause serious system damage.