ASUS mypal a600 사용자 설명서
Avolites Pearl 2000 Operators Manual - page
123
P2000MAN.DOC 19/10/99 17:59
•
Assuming it powers up correctly, press Softbutton A [Start The System].
Do NOT select any other option.
•
Power down the desk and unplug it.
•
Remove the link. Replace this as it was found.
Do not forget to remove the link
or the desk will always power up in AVOS!
•
Close the desk and refasten the Dzus fasteners.
•
Plug in and power up the desk.
•
Reload your Show in the usual way. See Section 14.1.3 Loading a show
from disk.
14.7 System Software
All System Software procedures take place with the Key turned to System.
BEFORE DOING ANYTHING TO THE SYSTEM, SAVE YOUR SHOW!!
The System Software is the software that runs the desk. This is the software
to which we are referring when we talk about Software upgrades or Software
versions.
to which we are referring when we talk about Software upgrades or Software
versions.
14.7.1 Finding your Software Version number
You will need to know this before calling Avolites for technical help.
•
Turn the Key to System.
Puts you in System Mode
.
•
Press Softbutton A [SERVICE].
Puts you in the Service menu
.
•
Press Softbutton B [SOFTWARE I.D].
The Software Version number is displayed on the prompt line of the Screen
along with the release date.
along with the release date.
14.7.2 Testing your buttons and faders
•
Turn the Key to System.
Puts you in System Mode
.
•
Press Softbutton A [SERVICE].
Puts you in the Service menu
.
•
Press Softbutton B [DIAGNOSTIC SCREEN].
•
The Screen displays a representation of all the buttons and faders on the
desk. You can press any button and see it register, or see the value
output by any fader. The normal range of the faders is 0 to FF.
output by any fader. The normal range of the faders is 0 to FF.
•
Press the Up Arrow to quit.
14.7.3 Changing your System Software
!!!!TAKE CARE!!!!
OPERATIONS FROM THIS SECTION ALTER THE CONTENTS OF
MEMORY AND SO CHANGE YOUR SHOW OR YOUR SOFTWARE. ONLY
USE THESE FUNCTIONS IF YOU HAVE NEW SOFTWARE SUPPLIED
FROM AVOLITES EITHER BY POST OR BY MODEM.
MEMORY AND SO CHANGE YOUR SHOW OR YOUR SOFTWARE. ONLY
USE THESE FUNCTIONS IF YOU HAVE NEW SOFTWARE SUPPLIED
FROM AVOLITES EITHER BY POST OR BY MODEM.
⇒
YOU ARE ADVISED TO READ THE WHOLE SECTION BEFORE YOU
START.