ASUS sl6000 사용자 설명서

To add an inbound ACL rule, follow the instructions below:

1. Log into Configuration Manager as admin, click the Firewall menu,

and then click Inbound ACL submenu. The Firewall Inbound ACL Con-
figuration page displays, as shown in Figure 9.1.

Note that when you open the Inbound ACL Configuration page, a list
of existing ACL rules are also displayed in the lower half of the con-
figuration page such as those shown in Figure 9.2. By default, no in-
bound access rule is configured.

2. Select “Add New” from the “ID” drop-down list.

3. Set desired action (Allow or Deny) from the “Action” drop-down list.

4. Make changes to any or all of the following fields: source/destination

IP, source/destination port, protocol, port mapping, log, and VPN. Please
see Table 9.1 for explanation of these fields.

5. Assign a priority for this rule by selecting a number from the “Move

to” drop-down list. Note that the number indicates the priority of the
rule with 1 being the highest. Higher priority rules will be examined
prior to the lower priority rules by the firewall.

6. Click on the [Add] button to create the new ACL rule. The new ACL

rule will then be displayed in the inbound access control list table at the
lower half of the Inbound ACL Configura-
tion page.

Figure 9.2 illustrates how to create a rule to allow
inbound HTTP (i.e. web server) service. This rule
allows inbound HTTP traffic to be directed to the
host with IP address 192.168.1.28.

Figure 9.2 Inbound ACL configuration example