ASUS VC133 사용자 설명서

3. HARDWARE SETUP

Motherboard Settings

Before using your computer, you must complete the following steps:

This section explains how to change your motherboard function settings through the
switches and/or jumpers.

 Computer motherboards and expansion cards contain very delicate

Integrated Circuit (IC) chips. To protect them against damage from static electricity,
you should follow some precautions whenever you work on your computer.

1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do

not have one, touch both of your hands to a safely grounded object or to a
metal object, such as the power supply case.

3. Hold components by the edges and try not to touch the IC chips, leads or

connectors, or other components.

4. Place components on a grounded antistatic pad or on the bag that came with

the component whenever the components are separated from the system.

5. Ensure that the ATX power supply is switched off before you plug in or

remove the ATX power connector on the motherboard.

 Make sure that you unplug the power supply when adding or

removing system components. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components. When lit, the onboard LED
indicates that the system is in suspend or soft-off mode, not powered OFF.

®

Standby

Power

Powered

Off

LED