ASUS VENTO 3600 사용자 가이드

E2844

 1.  Push down to release the top tabs of the cable

management kit, then pull up the cable management kit

to release it from the bottom tabs.

 2.  Remove three screws on the rear panel.

 3.  Turn the swivel 45º clockwise to release the side cover.

 4.  Push the side cover to the direction of the rear panel.

 5.  Tilt the side cover and slide it out of the chassis.

 1.  Slide the PSU into the slot until it snugly fits the metal

rail.

 2.  Secure with screws.

 3.  Set the voltage selector according to the voltage in

your area.

 1.  Push the marked portion of the Magic Mask

®

to open.

 2.  Remove the drive bay cover.

 3.  Slide the bay lock toward the   sign.

 4.  Insert the ODD into the bay.

 5.  Align the ODD holes with the bay holes, then slide

the bay lock toward the   sign to secure the drive in

place.

 6.  Connect cables.