ASUS wl-320ge 사용자 설명서

The ASUS 802.11g AP meets various working scenarios with proper 

configurations. You may need to change the ASUS AP’s default settings so as to 

meet the requirements in your environment. 

Configuring the ASUS 802.11g AP through a web browser. You need a Notebook 

PC or desktop PC connected to the ASUS 802.11g AP (either directly or through a 

hub) and running a web browser

 

 as a configuration terminal. The connection can 

be wired or wireless. For the wireless connection, you need an IEEE 802.11g/b 

compatible device, such as an ASUS WLAN Card, installed in your Notebook PC. 

You should also disable WEP and set the SSID to “default” for your wireless LAN 

device.

To access the ASUS 802.11g AP, you must have the correct TCP/IP settings on 

your wired or wireless clients. Ensure that the clients’ IP addresses are within the 

same subnet as the ASUS 802.11g AP.

Note: Changing TCP/IP settings may require rebooting your PC. When rebooting, the ASUS 

802.11g AP should be switched ON and in the ready state.