Axis 26720r1 사용자 설명서

Deciding on the combination of protocols and methods to use depends on your viewing 

requirements, and on the properties of your network.

RTP+RTSP 
This method (actually RTP over UDP and RTSP over TCP) should be your first consideration 

for live video, especially when it is important to always have an up-to-date video stream, 

even if some images do get dropped. This can be configured as multicast or unicast. 

Multicasting provides the most efficient usage of bandwidth, especially when there are 

large numbers of clients viewing simultaneously. Note however, that a multicast broadcast 

cannot pass a network router unless the router is configured to allow this. It is thus not 

possible to multicast over e.g. the Internet. 

Unicasting should be used for video-on-demand broadcasting. However, if more and more 

unicast clients connect simultaneously, the server will at some point become overloaded. 

There is also a maximum of 20 simultaneous viewers to be considered.

RTP/RTSP
This unicast method is RTP tunneled over RTSP. This can be used to exploit the fact that it 

is relatively simple to configure firewalls to allow RTSP traffic.

RTP/RTSP/HTTP or RTP/RTSP/HTTPS
These two methods can also be used to traverse firewalls. Firewalls are commonly 

configured to allow the HTTP protocol, thus allowing RTP to be tunneled.