Akai dvr4100vsscf 사용자 설명서

E - 11

1. Using the supplied 3 Phono/Scart cable, connect the yellow plug from VIDEO OUT jack on your Unit  to VIDEO IN jack on your

TV, connect the left and right AUDIO OUT jacks on your Unit to AUDIO IN jacks on your TV. If you want the sound come from the
speakers of the Main Unit, you need not to connect these left and right Audio cable from the Main Unit to your TV.

2. Using the Video cable (not supplied), connect the VIDEO IN (VCR) jack on your Unit to VIDEO OUT jack on your VCR.
3. Using the Audio cable (not supplied), connect the left/right AUDIO IN jacks on your Unit to the AUDIO OUT jacks on your VCR.
• An adaptor can be bought locally to connect the round RCA-style plugs to a scart socket. For the TV get a scart INPUT

adaptor. For the VCR get a scart OUTPUT adaptor.

1. Turn on the Unit, use the 

 button on the remote control or the front panel to select "DVD".

2. Turn on your TV and follow the instructions included with it to select VIDEO function which is correspond to the VIDEO IN

jack you need connected with the Main Unit.

1. Turn on the Unit, use the 

 button on the remote control or the front panel to select "AV_IN".

2. Turn on your TV and follow the instructions included with it to select VIDEO function which corresponds to the VIDEO IN jack

that is connected with the Main Unit.

3. Turn on the VCR and follow the instructions included with it to play the videotape.

•

If you want sound from the Unit and sound from equipment connected to it (see next page) to come only from the speakers of
the Unit, do not connect the left and right audio plugs from the Unit to your TV.

•

Sound from the VCR or other external equipment will not be heard from the television if you connect the television with a scart to
scart cable. This is because the scart connector on the DVD amplifier Unit only carries output from the DVD player part.

•

If VCR Audio is mono, surround speakers sound level will be low or absent.

Sound from the television does not go to the speakers of the DVD amplifier Unit with the suggested connections. To hear sound from
television programmes through th

DVD amplifier's loudspeakers you need to use your video recorder as a television tuner. To do

this follow these steps:
1. Connect up the VCR as above in "Connecting a VCR". If your television does not have the round (RCA-style) connectors you can

get an RCA to scart input adapter.

2. Press the 

button on the DVD Amplifier Unit to get AV_IN mode, shown on the front panel display.

3. On the television, select the AV or scart input channel for the DVD amplifier Unit.
4. On the VCR, select the television programme you want to watch.
5. On the DVD amplifier Unit select normal stereo or Pro Logic decoder modes according to your preference.

• Please refer to the AV_IN rows of the table on page 16 describing which speakers the sound will come out of.
• When using the VCR as a television tuner, you cannot watch one programme while recording another.

To wall outlet

(yellow)

(red)

(white)

(red)

(white)

(yellow)