Akai dvr4100vsscf 사용자 설명서

E - 27

1. Press the 

 button until the frequency band

appears on the display.

2. Press the 

 button on the remote remote or 

 button on the front panel to select the desired

band.

3. Press the 

 

 button to tune in the desired station.

• Press the 

 button on the remote until 

appears on the display..

• Press the 

 button on the remote until the 

 word appears on the display.  Background

noise will be reduced but the signal reproduced will be
mono. To restore stereo reception, press the 

button on the remote to select STEREO.

• The left / right front speakers and subwoofer are activated only.

• Hold down the 

 

 buttons on the remote, and a station is searched for automatically. After tuning in a

station, the search stops.

• The search may not stop at a station with a very weak signal.

You can tune into a stored station directly by entering the preset number.

20 stations on FM band can be preset.

20 stations on AM(MW) band can be preset.

1. Press the 

 button until the frequency band appears on the display.

2. Press the 

 button on the remote to select the desired band.

3. Use the 

 

 button to find your desired station.

4. Press the 

 button on the remote.

5. Press the 

or 

 

 button to select the preset number and press the 

button on the remote

to store the station.

6. Repeat steps 2-5 to store other stations.

1. Press the 

 button on the front panel until the frequency band appears on the display.

2. Press the 

 button on the remote to select the desired band.

• Press the   

 button and 

or

 

 button to select the presetted station or use the numbered

buttons to enter the number to select the presetted station.

To select preset number 15, press the +10 and 5 buttons.

To select preset number 10, press the +10 and 0 buttons.

(continued on next page)

E-27-28.p65

9/26/2003, 5:37 PM

27