Siemens SF64T353EU 전단

다운로드
페이지 28
en
13
Tip
If the utensils are only lightly soiled, 
slightly less than the indicated amount 
of detergent is usually adequate. 
Suitable detergents and care products 
can be purchased online via our website 
or via customer service (see back page). 
Combination detergent
Apart from conventional detergents (Solo), 
a number of products are offered with 
additional functions. These products 
contain not only the detergent but also 
rinse-aid and salt replacement substances 
(3in1) and, depending on the combination 
(4in1, 5in1, etc.), additional components 
such as glass protection or stainless steel 
cleaner. Combination detergents function 
only up to a specific degree of hardness 
(usually 26° Clarke). Over this limit salt 
and rinse-aid must be added. 
As soon as combined detergents 
are used,  the rinse  programme  is adjusted 
automatically to ensure the best possible 
rinsing and drying result.
Notes
You will obtain optimum rinsing 
and drying results by using solo 
detergents and applying salt and rinse 
aid separately.
If programmes are short, tablets 
may not have full cleaning effect due to 
different dissolving properties 
and there may even be undissolved 
detergent residue. It is recommended 
to use washing powder for these 
programmes.
The Intensive programme (on some 
models) requires one tab only. When 
using washing powder, you can apply 
some of this cleaning agent to the 
inside of the appliance’s door.
Even if the rinse-aid and/or salt refill 
indicator is lit, the rinse programme will 
run correctly with combined 
detergents.
If using detergents in a water-soluble 
protective cover: Take hold of the 
cover with dry hands only and put 
the detergent into an absolutely 
dry detergent dispenser only, otherwise 
the detergent may stick.
If you switch from combined 
detergents to solo detergents, ensure 
that the water softening system 
and amount of rinse aid have been 
set to the correct value.