American Audio pro mix 사용자 설명서

American DJ ® AUDIO • PRO MIX™ INSTRUCTIONS MANUAL • PAGE 5

1. Checking the contents

Check that the carton contains the following items:

1) PRO MIX Controller unit 
2) 4-pin Power cord with adapter (6 feet / 1.8 meters)
3) Control cord - to attach unit to computer’s COM port (6 feet /1.8 meters)
4) Operating instructions (this booklet)
5) PRO MIX Player Software install CD

2. Connections

1) Make sure computer is off. Connect one end of the control cable to the computer’s 

COM port (or serial port). (Refer to computer’s documentation if you are unsure 
which port to use.)

2) Connect the other end of the control cable to the PRO MIX Controller port.
3) Connect the 4-pin power cord male plug into the PRO MIX female power socket.
4) Plug the power cord’s adapter into an electrical outlet. 
5) Connect audio cables, speaker plugs, or headphone plug into the computer’s Sound

card - depending on the Sound card’s output jacks and the desired audio set up. 

Always check that the sound output levels are lowered before restarting the compu- 

ter to avoid possible hearing or speaker damage. 

3. Installing the Unit

Mount the unit on to your console or rack with 19" EIA rack rails or set on tabletop.

CAUTION:
Be sure to use the supplied control cables. Using another type of cable may result in damage or may
compromise performance. Be sure the power is off to the unit and computer when connecting the 
control cable. Otherwise the unit may not work properly and may cause damage the computer. 

Windows PC

PRO MIX Controller - Rear Panel

COM or
serial port

Sound card 1

Sound card 2
(optional)

to electrical

outlet

to mixer, speakers, 

or headphones

(See also pages 18-19 for computer system configuration using screen panel).